Sanitary Flexible Impeller Pump
To find out which pump is best for your application, please fill out our pump application data sheet
Connections:
1 HP : 1" X 1" Tri-Clamp
2 HP : 1 1/2" X 1 1/2" Tri-Clamp
3 HP: 2" X 2" Tri-Clamp
4 HP: 2" X 2" Tri-Clamp
Parts in contact with the product: 316L Stainless Steel
Impeller: Food-grade neoprene impeller
Mechanical seal:
Rotary part Carbon (C)
Stationary part Ceramic (Cer)
Gasket NBR
Max, temperature: 180°F
Max, speed: 1800 rpm
Motors: 1 - 4 HP
IEC Motor IP 55 ( Nema 4X)
* 3-Phase, 60Hz
* 1745 RPM
* 208-230/460 Volt
* TEFC Enclosure
* 1.15 Service Factor
* Class F Insulation
Note:
Even a self-priming pump has to be primed initially.
No matter the product, there is a priming chamber (integral or external) or some portion of the volute that will require filling prior to startup.
All pumps need fluid in the casing to get started. Running dry, even for a short while, will cause damage to the mechanical seal, and the pump will fail.
We recommend using a 100 mesh strainer at the discharge of the pump.
The Flexible Impeller has gentle pumping action and ensures the consistency of the fluid remains unaffected by shear forces e.g. milk, cream, and thixotropic fluids.
Also, the flow is also non-pulsating, the solids can be handled with ease, but also without damage. Seeds, grapes, and fruit in suspension can be handled gently, retaining solid integrity. Solids are also kept in suspension which can be important with textured products, such as; yogurts, drinks, or sauces, that is why our customers prefer to use this positive displacement pump.
The warranty does not cover the Mechanical Seal, Impeller, or other parts damaged.
FLOW AND PRESSURE
1 HP up to 13 GPM @ 30 PSI |
2 HP up to 35 GPM @ 30 PSI |
3 HP up to 44 GPM @ 30 PSI |
This information is provided for reference purposes only. To find out which pump is best for your application, please fill out our pump application data sheet
VISCOSITY TESTS
Watch the Videos Below