Pneumatic Sanitary Tri-clamp Valve with Sealed Actuator

  • $307.06


Valve description:

  • Type: Clamp
  • Model: TP-PBFV
  • Material: Stainless Steel 304, Polish:
  • ID: >180 Grit (<32 Ra)
  • OD:180 Grit.
  • EPDM seal (Standard) 
  • Max. temperature: 200 ° F
  • Max. fluid operation pressure: 150 psi
  • Seals in EPDM and Silicone are available for spare parts.  

Pneumatic actuator description: 

  • Material: Stainless Steel 304, Polish:  OD:180 Grit 
  • Operation: Air to open, spring to close. (single acting
  • One actuator size for 1" through 4" valves
  • Air pressure required 70-90 psi to operate the actuator

Dimensions:

 Static seal temperatures

Gasket Properties EPDM VITON
Heat resistant Excellent (275°F) Excellent (400°F)
Cold resistant Good-Excellent (-20°F) Good-Excellent (-30°F)
Steam Good Excellent
Abrasion-resistant Good-Excellent  Good
Alkali Good Poor-Good
Acid resistance Good-Excellent  Good
Vegetable oil Good Excellent
Petroleum oil Poor Excellent
Oxonia Good-Excellent  Excellent
Ozone Good-Excellent 

Excellent

 

Note: The surfaces in contact with a seal determine what type to use. The surface can either be static or dynamic, in motion or without movement. Static seals are usually used when there is no relative motion between mating surfaces. Dynamic seals are the opposite. They are used when there is motion between surfaces. This can be either reciprocating or oscillating motions. Dynamic application in combination with high temperatures also affect the properties of elastomers.

   

Dynamic seal: A dynamic seal is exposed to movement.
Examples: Butterfly valve gaskets

Max. Temperatures Recommended for Our Butterfly Valves

Recommended temperature for short periods of time (15-20 min): EPDM:  260°F, VITON: 285°F

 

Recommended temperature for everyday use: EPDM:   200°F, VITON:  210°F

 

 


We Also Recommend